Port Kembla

Port Kembla NSW – Port Kembla Terminal

Contact:

Administration Ph: +61 2 4221 0900
Rec & Del Office Ph: +61 2 4221 0920/1

Port Kembla Terminal is located at Berths 105 106 and 107, Yampi Way (off Tom Thumb road), Port Kembla. An additional Berth, 103 was completed in late 2008 and is designed as a multi-purpose facility catering for motor vehicles, general cargo and containers. The Terminal has a total area of 44 hectares.

The Facilities

The site complies with all Australian Customs requirements and operates as a 24/7 facility. It is operated as an open access regime allowing any stevedore or PDI operator to apply to operate from the terminal.

The buildings on the site provide modern and clean amenities for stevedores, office personnel and visitors. There is 24/7 onsite security with the main entrance is security controlled at all times.
The Terminal currently has undercover storage capacity of 18,000 square metres.

AAT Port Kembla Pollution Incident Response Management Plan (PIRMP)

Berth Priority Rules

AAT allocates Berths in accordance with PKPC’s Port Parameters and Berthing Guidelines. Refer to PKPC Berthing Priorities

Open Access Regime

The facilities are operated under an open-access regime. Any stevedore or PDI operator may apply to have access to the site to service their customers. The access is on a non-discriminatory basis so that all parties are provided services to the same level.

Stevedores or PDI operators seeking access can apply through AAT who will provide a stevedore licence or PDI sub-lease to approved applicants. Tariffs are published and are available to all umarkets com parties seeking access to the site. The tariff will be displayed at the site and are published on the AAT website. Within the stevedore licence, dispute resolution procedures are provided to enable parties to resolve any issues that may arise.

General Facts and Services

Port Kembla Terminal has 24/7 available access. AAT’s Receival and Delivery operations are Mon to Fri 0600 â€“ 1400hrs. Additional hours and shifts can be negotiated with Terminal management.

AAT Services

Motor Vehicles
Roll-on Roll-off Handling
Break Bulk Cargo
Container Handling
Reefers
Dangerous Goods Handling
Storage
AQIS approved Services
Pack / Unpack Mafi Cargo
Rail Services

Cranes:	Fleet #	SWL
Liebherr Crane	L3	100T
Kalmar DRU450	R01	57T
Kalmar DRG1300	R03	130T
Kalmar DRG1300	R04	130T

Forklifts:
Kalmar Reach Stacker	R02	45T
Top Frame Omega	F36	40T
Low Mast Omega	F88	32T
Low Mast Omega	F89	32T
Low Mast Omega	F90	32T
Low Mast Omega	F94	32T
Low Mast Hyster	F29	18T
Low Mast Hyster	F28	18T
High Mast Kalmar	F27	16T
Low Mast SMV	F26	16T
Low Mast Omega	F25	16T
Low Mast Kalmar	F24	16T
Low Mast Kalmar	F21	16T
Hyster	F61	8T
Hyster	F62	8T
Hyster	F80	7T
Hyster	F59	7T
Hyster	F69	7T
Hyster	F25	5T
Hyster	F23	5T
Clark	F30	3T
Hyster	F28	3T
Hyster	F22	2T

Tugs/Dock Truck:
DAYSWORTH	P30	60T
TERBERG	P31	150T
TERBERG	P34	150T
TERBERG	P35	150T

Scissor Lifts:
Haulotte	SC01	230kgs
Haulotte	SC02	230kgs

Berth Information – Port Kembla

BERTH 103	Length	180m
	(Berth Box 240 mtrs)
	Vessels to 200 mtrs TBC
	Draft	14.4 + Tide – 0.3m

BERTH 105/106	Total length 105/106 430m + 80m dolphin berth

BERTH 105	Length	190m + 80m Dolphin
	Draft	15.1 + Tide – 0.3m
	Height above Low Water	3.26m

BERTH 105	Approx Length & Width of Platform	40 m x 40 m
(PLATFORM EXTENSION)	Bridge Roadway Width	8 Metres
	Weight Loads to suite forklifts such as
	54D 54E – 25 T for each 4 wheels

BERTH 106	Length	240m
	Draft	14.2 + Tide – 0.3m
	Height above Low Water	3.26m

BERTH 107	Length	290m
	Draft	12.2 + Tide – 0.3m
	Height above Low Water	4.2m

Note: As berthing pocket depths vary with time please confirm with NSW Ports Authority